MultiBox // Meris Enzo?

wisconimike

Well-Known Member
Good morning!
I'm going to add an Enzo to my board. I've scanned the other Enzo threads and didn't see anything MultiBox related.
My current MIDI setup is:
PBC/6X --> MultiBox
---Mobius --> BigSky MX --> Timeline MX
---Chase Bliss Clean
---Chase Bliss Gravitas
---Suhr Micro MIDI (for flippping the red remote on the JHS Kilt v2)
---POG2 w/MIDI Mod --> Boss SY-200 (being replaced by Enzo)
---Morningstar ML10x --> Free the Tone PAQ1B EQ
---The last output is usable, but would be tricky to get to. Poor initial planning on my part b/c I didn't think I'd need it.

2 questions:
1) is the MultiBox configurable for Meris Enzo needs? I believe Enzo takes MIDI with 1/4" TS, tip active. This would be if I can use that last output.
2) if not, or if I can't get to the last output, would there be any issue with me putting another MIDI distribution box like the MultiBox (or other if it doesn't work for Meris) in the chain?
Ex: Instead of MultiBox --> POG2 --> PAQ1B
I could do: MultiBox --> [2nd box] --> POG2
-------------MultiBox --> [2nd box] --> PAQ1B
-------------MultiBox --> [2nd box] --> Enzo
That still would never have more than 3 devices in any chain, but it seems a bit weird having 2 distribution boxes in a single line.
Thanks so much!
I'm 2 years into my PBC and MultiBox setup and never, ever have issues. Love this stuff!
Cheers,
Mike
 
Last edited:
The Meris Enzo seems to be Tip Active from what I've read and that's the default setting for the Multibox jacks.
 
Spent some good time on this today and never got it to respond to any MIDI. I'll do some more digging, but in case I must: is there any issue going from PBC/6X --> MultiBox --> another distributor like the Meris MIDI I/O?
 
Spent some good time on this today and never got it to respond to any MIDI. I'll do some more digging, but in case I must: is there any issue going from PBC/6X --> MultiBox --> another distributor like the Meris MIDI I/O?
No issue in doing that, but I would suggest reaching out to Meris for help as well.
 
Cool, thanks!
Yeah, for sure. I reached out and they didn't say I have to user their Meris I/O, but of course told me to buy their product and basically didn't answer me about other options
 
I started looking online for an answer and it seems like there's a lot of misinformation out there. I even read one thing where it said to set the Multibox to Ring Active for the Meris. I've also read that it requires Meris' box. Then I ran out of time, will try to revisit in the morning but someone's gotta have an answer on this, especially Meris. If you don't have to specifically use their box, then what TRS type is required.
 
Thank you, Mario!! I also reached back out to Meris to try to press for answers.
And I posted on the Gear Page and on the Chairmen of the Boards FB page hoping someone has gotten this combo to work.
Will keep you posted!
 
Meris wrote back with this. No need to respond yet, as I have tests to run (unless of course there are any developments on your end). Just keeping the thread up to date.
We haven’t tested the MultiBox with Enzo yet, so I do not have exact troubleshooting instructions for this setup. With everything you described it should be working— Enzo receives MIDI on the tip and sends out on the ring of the TRS cable. Connecting to TRS, with MIDI sending over the tip should work no problem.

Could you try swapping MIDI channels for me to a channel other than 11? Are you able to get MIDI to the Enzo at all with another setup?

Also, just for troubleshooting purposes, do you have an expression pedal that you can test with the Enzo? There is a small possibility that the EXP jack may have a separate issue, and if you’re able to use an expression pedal with the Enzo that would rule out that possibility.
 
@Mario can you confirm that this is theoretically the correct setup for the Enzo?
Sure seems like it, but want to be 100%
1792704553021.png
 

Attachments

  • 20261022_172722.jpg
    20261022_172722.jpg
    1.4 MB · Views: 2
Ok, no idea what might have changed, but it's working now. No clue. It definitely works with the tip active set up and a TRS cable.
Man, what a mixed bag that is: so satisfying to get it working and so UNsatisfying to have no idea what changed haha.
Thanks for all your help!
At least we learned, YES, the Meris Enzo can be controlled by a Tip Active configuration in the MultiBox!
 
Thanks for the update! I understand your DISatisfaction not knowing what changed, but sometimes it's best to move on. I recently had multiple non guitar gear situations like this. I think I've reached the age of being better at picking my battles, lol.
 
Haha, that's definitely true--not all battles are worth fighting.
At least this one I conquered in the end!

Haha, and yes DISsatisifed, not UNsatisifed
 
Back
Top