Reverse the on and off colors.

R

Riekkes

Member
Reverse the on and off colors.
This seems much more logical to me. Fully bright is ON and OFF is darker.

I still can't get used to it after such a long time.

Maybe just a small adjustment for Ron.
But a big help for me and perhaps others.
 
I'm not sure what you mean? You can choose any color you like for the on or off color, dim or bright.

Edit: looking at the thread in the PBC section, maybe you mean reverse the LCD so the black pixels are white and vice versa?
 
rjmmusic said:
I'm not sure what you mean? You can choose any color you like for the on or off color, dim or bright.

Edit: looking at the thread in the PBC section, maybe you mean reverse the LCD so the black pixels are white and vice versa?
Click to expand...
Thanks for the quick reply, Ron.

Yes, I think that's what I mean
see picture

But I reverse the LCD myself i think if i set the on Value on 0 en de off value on 127
 

Attachments

  • ON OFF.jpg
    ON OFF.jpg
    42.4 KB · Views: 3
I think this is a great idea; I've wanted to do this for a long time. "On" colored and with bright white or black letters and "OFF" reversed, exactly like in the picture in the post above
 
Cyberdan said:
I think this is a great idea; I've wanted to do this for a long time. "On" colored and with bright white or black letters and "OFF" reversed, exactly like in the picture in the post above
Click to expand...
I reversed the the colors myself: I set the on value to 0 and the off value to 127. It works perfectly for me.
 
I don't quite understand; I can only choose the color. The values 0 or 127 only refer to the CC commands for the corresponding MIDI device, so what am I overlook?
 
Typically an IA button action turning a loop on and off would look like this:

Effect Gizmo: Loop 1 / CC Toggle #80 off:0 on:127

In "Riekkes" example, it would look like this:

Effect Gizmo: Loop 1 / CC Toggle #80 off:127 on:0

The "off" and "on" values have been swapped, effectively reversing the displays.
 
Here's how it works on my amp:

CCX 0 = OFF, CCX 1 = ON

Those are the fixed settings, and I can't just switch them around, because then the amp won't switch anymore.
 
Sorry but those don't look immediately familiar to me, can you send me a screenshot from the Mastermind Editor?
 
Here's an example for the VHX, with a button to turn the flanger on or off.

This is the normal setting:

VHX:Flanger / CC Toggle #31 off:0 on:1

This is the reversed setting:

VHX:Flanger / CC Toggle #31 off:1 on:0
 
You must log in or register to reply here.
Back
Top